Problems and Causes of Waste Washing Equipment during Operation

The faults that occur during the operation of waste washing equipment are generally equipment failures, and the causes of equipment failures are generally obvious. Functional failures are mainly caused by damage to components in the equipment, resulting in the loss or stoppage of some functions of the equipment. Generally, it is very intuitive to accept the fault and discharge it. Parameter failure is due to the fact that the parameters of the coal washing equipment during operation far exceed the limit of the equipment, and the display on the instrument side of the washing equipment is abnormal and unpredictable. So, let's learn about the problems and reasons that occur during the operation of the washing equipment together!

The filter press in the gangue washing equipment needs to be maintained for a period of time. Special attention should be paid to the components and pressure gauges in the hydraulic system of the waste washing equipment. Next, we will share the key points of maintenance.
1. The cleaning equipment should regularly check the connection parts of the filter press to see if they are secure, whether it is necessary to increase the lubricating oil for the connection parts, check the wear of the transmission parts and vulnerable parts, and repair and replace them in a timely manner.
2. The washing equipment must regularly inspect and maintain the cleanliness of some components in the equipment. In this way, the components can obtain flexibility in their working form during operation.
3. Regularly check the insulation and safety of the circuit system, take waterproof, moisture-proof, and dustproof measures for electrical components, replace aging or damaged circuits in a timely manner, provide insulation protection, and hang danger signs for electrical equipment.
4. Regularly inspect the hydraulic components and hydraulic oil of the hydraulic system to ensure the sealing of the hydraulic system interface.
5. The sealing surface of the filter plate should be smooth and clean, and the filter cloth should not be broken or damaged before stamping. After use, the filter cloth should be rinsed to maintain good filtering performance. When the equipment is shut down for a long time, clean the filter plate, place it on the bracket and press it tightly. After cleaning the filter cloth, dry it and store it.
In addition, there are also normal malfunctions that occur during the operation of the waste washing equipment. This type of malfunction mainly refers to damage, corrosion, and fatigue of equipment components caused by long-term operation, and consumable components need to be replaced regularly. Another malfunction is designed without considering the actual operation and potential problems of the coal washing equipment, as well as the force majeure damage that may occur during transportation. Therefore, incorrect operation by operators during use can also lead to certain malfunctions.
In addition to the above-mentioned equipment failures, the selected raw coal can also cause certain damage to the equipment. If the quality and particle size of the raw coal are not consistent with the actual processing requirements of the equipment, it will not only affect the coal washing efficiency of the equipment, but also cause certain damage to the components of the equipment. In addition, during the operation of the waste washing equipment, it may be affected by uneven supply, conveying speed, and filtration degree, resulting in a decrease in the equipment's processing capacity.
The above introduction is about the problems and causes that occur during the operation of the waste washing equipment. If you need to learn more, please feel free to contact us at any time!